-
Cri/oFlex® 2
Cri/oFlex® 2 series is specifically designed for cryogenic environments where thermal load, microwave performance, small form factor and phase stability are critically important. Our standardized flexible RF cable Cri/oFlex® 2 is ideally suited to solve space constraints in crowded setups, such as table-top cryogenic systems or densely populated mixing chambers of dilution refrigerators. The flexible RF cabling is based on monolithic waveguides; the phase stability is practically insensitive to vibrations or bending. Our versatile Cri/oFlex® technology remains highly flexible from room temperature down to cryogenic temperatures. The excellent microwave properties of our waveguides survive many bending cycles and bending radius as small as 1 mm. To speed up our production and ensure faster delivery times, we have developed standardized cable dimensions and connector options.®
Click here for details -
Cri/oFlex® 3
Delft Circuits have re-envisioned the cryogenic i/o chain: a single-shot solution for getting your microwave signals from room temperature directly down to milliKelvin using a flexible multi-channel cabling solution. As part of this effort, every component of our Cri/oFlex® 3 flagship product is designed for scalability. Key challenges include balancing the thermal and electrical characteristics, whilst maintaining the robustness of the system in terms of installation and use. By using signal lines with distributed attenuation and integrating microwave signal conditioning, we almost completely eliminate the need for additional microwave components. Additionally, the small volume and low thermal load greatly increase the number of signal lines that can be installed inside a dilution refrigerator. This makes a flexible multi-channel cable Cri/oFlex® 3 a truly scalable technology for cryogenic i/o.
Click here for details -
CFHT Series Liquid Helium Transfer Hose/Line
An efficient liquid transfer line is essential when using super-cooled gases that evaporate at a low temperature. To meet these operating requirements, Cryofab helium transfer hose are carefully fabricated using all-welded stainless steel construction and super-insulated to provide the optimum in thermal performance. The inner configuration of all assemblies, whether it be rigid tube or flexible, is stainless steel of minimum wall thickness to reduce cool-down losses and heat leak.
Click here for details -
CMSH Series Portable Liquid Helium Dewars
Designed for minimum-loss storage, transportation and dispensing of liquid helium. Our state-of-the-art vapor-cooled multishield technology with superinsulation ensures the lowest guaranteed loss rates*.
Click here for details -
Superconducting Magnet Dewars CSM/CVSM Series
The superconducting magnet dewars product line was designed specifically to facilitate superconducting magnet research. The same advanced engineering apparent in Cryofab’s other product lines is applied in the design and construction of the magnet dewars. Our superconducting magnet dewars are fabricated entirely of stainless steel and will accommodate coils of all generally available magnets.
Click here for details -
CL/CLPB Series Dewars
A CL or CLPB liquid nitrogen tank is portable, safe, and convenient storage that works equally well for liquid argon or liquid oxygen. The CL Series tanks are not pressurized, while the CLPB tanks are self-pressurizing.
Click here for details -
Liquid Nitrogen Hose CFCL Series
This product is designed for applications that require reduced product evaporation and elimination of frost and condensation during transfers. The combination of vacuum jacket and super insulation make this product the optimal efficient flexible transfer line.
Click here for details -
CFN Series Atmospheric Dewars
The absolute back-to-basics low-pressure storage without bells and whistles. This product line is a throwback to the days of simple fabrication and uncomplicated operation. The design criteria for this product line is to supply a robust container for the transportation and atmospheric storage of liquefied gases in smaller capacities.
Click here for details -
CH Series Cryogenic Storage Tanks
The CH Series cryogenic storage tank is intended for low-pressure inter-facility transport and storage of liquid nitrogen, oxygen, and argon. Convenient Access to Cryogenic Liquids
Click here for details